This single edge creaser makes a decorative line along the edge of your vegetable tanned leather, bridle leather or harness leather. This leather tool also gives a slight roundness to the leather edge. Place the long side of the creaser tool against the edge of the leather as a guide and make the impression with the short side while pushing the tool being held in a vertical position. The edge creaser tool has a hardwood handle and a brass ferrule. The larger the size number, the further the line will be made from the edge of the leather. The line is best debossed in bridle and tooling leather that has been dampened first with water on the top surface. Made in the United States by C.S. Osborne.
The size #2 has a width of 5/64 inch.
Watch the following leatherworking video of the CS Osborne creaser tool being used to emboss a border line and round edges on a handmade leather belt.
