These Brass Plated Line 24 Snaps for leather consist of four components, a top cap, secured to the material with a socket, and a bottom stud, paired with an eyelet. The strong spring in the socket grips onto the groove in the stud to hold both sides firmly together. This is the quality hardware that you've been looking for. You can count on the consistent and perfect fitting every time! This is a package of 10 complete snap sets.

Product information:

• For use with 3.6mm - 4.0mm (9 - 10oz) thick leather.
• Cap: 15mm (9/16") diameter
• Post: 8mm (5/16") height
• Brass Plated finish

To set the brass plated line 24 snaps, you need to first punch a hole in the leather for the snap cap and another hole for the snap post (eyelet).  After each are inserted into the holes, place the socket over the snap cap post to be set. Under the snap cap, you will need to place a concave anvil so the cap keeps the nice curve when you set it. To do this, you need a setter to hit with a mallet that will crimp the metal snap post around the inside of the socket. The other part which is the post (eyelet), place it on the flat anvil, place the stud over the post and use the setter to crimp the metal snap post (eyelet) inside the stud. The snap setter required for this size line 24 snap will not work with the smaller size line 20 snaps. However the concave anvil will work with both this line 24 snap and the smaller line 20 snaps.

When buying snaps for leather, the thickness of leather must be considered. These line 24 snaps work great with 9-10 oz thick leather.  An oz is about 1/64 inch thick.

Following is a video showing how to set jacket snaps with long posts in thicker leather.  The procedure is the same for learning to set snaps in leather with line 20 and line 24. Just make sure you have the appropriate setter for the line of jacket snap used.  Also the mini anvil makes a great work surface instead of using a large homemade anvil shown in the video.